* Linksys WPC54G v5, WPC11 v4, WMP54G v4, WUSB54G v4 * Jensen Scandinavia Air:Link 6011 PCMCIA * Encore Electronics ENLWI-G, ENPWI-G and ENPWI-B-RECA * D-Link DWL-520 (Rev D1) and Air DWL-650 * Asus WL-107G and A8V Deluxe Wireless Edition Hopefully this means that if you own one of the following cards or hardware, you won't have to connect to the Internet for it to work: * Marvell 88w8335 "Libertas" chipset (PCI ID = 11ab:1faa) In Bea, mintWifi supports the following chipsets: Your PCI ID is actually called an USB ID and you can find it by typing lsusb in a Terminal. Note: If you're using a USB Wireless adapter. The PCI ID will be in the third column of the output and will be in the form 104c:8400. Your device will be referred to in the output of the command by the identifier which you just made a note of, e.g. Now, type lspci -n into the Terminal and press return.ĥ. Once you have identified your card, note down the contents of the first column, which should look like 0000:00:0c.0.Ĥ. Look through the output of the lspci command for an entry for your wireless card.ģ. Open a Terminal (Applications->Accessories->Terminal), type lspci and press the return/enter key.Ģ. Follow the steps below to find out your card's PCI ID (which uniquely identifies your chipset):ġ. You need to identify your card's chipset in order to know exactly which driver will work for it. The important thing is to identify exactly which chipset is used by your wireless card. Identify your Wireless card's chipset and its PCI ID Note: If this didn't work and you get an error message like the one below, just ignore it and proceed to section 2:įATAL: Error inserting ndiswrapper (/lib/modules/2.6.17-10-generic/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Invalid argumentĢ. Open a Terminal (Applications->Accessories->Terminal) and type sudo modprobe ndiswrapper to load ndiswrapper. All you need is a Windows driver: a directory that contains an INF and eventually a SYS file.ġ. If your card doesn't work out of the box and there is no Linux driver for it, don't despair! mintWifi comes with ndiswrapper, which allows most Wireless cards to work under Linux with a Windows driver. To achieve this purpose mintWifi gathers documents such as this web page, tools such as ndiswrapper and ndisgtk and a collection of drivers. The purpose of mintWifi is to allow you to configure your wireless card without an Internet connection. I tried the link and it isn't working for me? Has it been relocatedįile:///usr/lib/linuxmint/mintWifi/index.html
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |